57
1. Guide
7. System Setup
S
yst
em
S
e
tup
56
1. Guide
7. System Setup
S
yst
em
S
e
tup
[Figure 7-45. Motion Link setting]
[Figure 7-46. Motion Connection Setup Screen(DW-716)]
�
To access Motion Link setting, use the
mouse or the directional keys to select
[Setting]. The system will display Motion
link setup as shown in Figure 7-46.
[Motion Camera]
�
Select the camera that will detect the
movement in its motion-detection area by
using the mouse wheel or the jog/shuttle on
the system.
[Link Camera]
�
Select the cameras that will be linked to the
[Motion Camera] by using the mouse or the
directional keys. You can link multiple
cameras to the [Motion Camera].
7.4.4 Schedule
7.4.3 Motion Link Setting
[Figure 7-47. Schedule]
[Figure 7-48. Schedule Setup]
�
In [Schedule] menu, you can set
automatic schedule for each camera and
their recording mode.
[Camera]
�
Use the mouse wheel or the jog/shuttle to
select the camera to change its schedule.
[Recording Mode]
�
You can select a recording mode for the
selected camera by using the mouse or the
direction keys to highlight the time you
wish to set, then use the mouse wheel or
the jog/shuttle to change the recording
mode.
�
Available recording modes are listed on
the table below. You can also set non-
recording period per camera if you wish
to.
[Apply All]
�
Click the [Apply All] button to apply the
current camera setting to all cameras.
�
C :
Continuous Recording
�
M :
Motion Recording
�
S :
Sensor Recording
�
P :
Pre-alarm Recording
Recording Mode
Available Recording Modes
Schedule Setup Display Channel Display
�No Recording
�Continuous Recording
�Motion Recording
�Sensor Recording
�Motion & Sensor Recording
�Motion & Pre-alarm Recording
�Sensor & Pre-alarm Recording
�Motion & Sensor & Pre-alarm Recording
NONE
C
M
S
M : S
M : P
S : P
M : S : P
None
Red REC
Orange REC
[Table 7-2. Recording modes]
[Motion link setting]
�
You can set a motion-link recording for each camera.
�
When the camera detects movement in the motion-detection area, the linked camera will
begin recording as well, regardless of its recording schedule.
�
To use Motion-link recording, the camera detecting the movement must be set to Motion-
Detection recording in the schedule. If the camera’s schedule is set to Continuous Recording,
Motion Link will be disabled.
�
In Surveillance mode, when the camera detects movement in its motion-detection area, the
linked camera channel will flash ‘REC’ and begin recording.
