Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 21 -
9.1.2 USB Print
1. Insert U disk into the USB port at the back of main unit;
2. When U disk connected to this instrument, the status bar at the bottom right of the screen will
pop up USB icon;
3. Save the images or reports within the system to U disk, unplug the U disk after completed
saving;
4. Connect U disk to PC, you can print out the images or reports by the default printer in the PC.
9.2 Transfer BMP files
After successfully set the network, the images or reports can be transferred to PC application
software “Network Printer”.
Operation: After successfully set the network, freeze the image, press
key on the keyboard to
transfer the image. When the lower-left corner of the screen shows “Transfer success”, it indicated the
image or report has been transferred to Network Printer. If prompts “Transfer fail”, see the [Net
Setting] in the
【
System Preset
】
, reset the network,
Description: the specific use of Network Printer sees its instructions for use.