Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 6 -
Chapter Three
System Configuration
3.1 Typical configuration
1. Main unit
1 unit
2. 6.5MHz animal transrectal linear array probe 1 PC
3. Power adapter
1 PC
3.2 Optional parts
1. 3.5 MHz convex array probe
2. 3.5 MHz linear array loin probe
3. 4.0 MHz convex array transrectal probe
4. 6.5 MHz micro-convex probe
5. 7.5 MHz high frequency linear array probe
6. Video recorder
7. Foot switch
8. Internal battery
9. Charger
Chapter Four
Operation Condition
4.1 Power supply
Adapter rating: 100-240V~, 1.2-0.6A, 50-60Hz
Adapter model: BJE01-40-001M
Output of Adapter: DC12.8V 3.0A
Main device rating: DC12V 3.0A
4.2 Operation Environment
Ambient temperature: 10
℃
-40
℃
Relative humidity: 30%-75% (without condensation)
Atmospheric pressure: 700hPa-1060hPa
Altitude: < 2000 m
Overvoltage: Overvoltage Category
Ⅱ
Pollution degree: 2
4.3 Storage and Transport
Ambient temperature: -20
℃
-55
℃
Relative humidity: 30%-93% (without condensation)
Atmospheric pressure: 700hPa-1060hPa
Attention
: The mains voltage is varies with different countries or regions.
Danger:
Do not use this equipment where flammable gas (such as anesthetic gas,
oxygen or hydrogen) or flammable liquid (such as alcohol) are present. Failure to do
so may result in explosion.
Warning:
Avoid using this equipment with high frequency operational equipment,
or danger may occur.
Attention
: System should be avoided using in following environments:
1. Splash
2. Moist
3. Rain
4. Thunderstorm weather
5. No ventilation
6.Close to heat source
7. Direct sunlight
8. Dramatic temperature change
9. Poisonous gas
10. Corrosive gas
11. Strong shock
12. Strong electromagnetic field (e.g. MRI)
13. Radiation (e.g. X-ray, CT)
14. Defibrillators or short wave therapy equipment