Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 14 -
Chapter Seven
Functional Operation
7.1 Startup and Shutdown
Press the button
on the bottom of screen, turn on the machine. If you want to turn off the
machine, please press the button
again, then pull out mains plug from the supply mains.
7.2 Keyboard light
Press the button
on the bottom of screen, open the keyboard light. If you want to close the
light, press the button
again.
7.3 Patient basic information
1. Press
key, “Patient Data Input” dialog box will be showed;
2. Move the cursor to “Name”, “Age” and “ID” , press
『
Set
』
key, input the data individually;
3. Choose the sex;
4. Move the cursor to
「
OK
」
of the dialog box after inputting, press
『
Set
』
key to confirm saving and
exit;
5. Press
「
Cancel
」
of the dialog box it will give up inputting information and exiting the dialog
box.
7.4 Probe selection
Press
key to realize the interchange of probe. The probe model is shown in the upper right of
the image area.
7.5 Mode selection
7.5.1 B mode
B mode is a basic operation mode. On starting the machine or press
key, a single-framed
image in B mode is displayed. Press freeze key to freeze or unfreeze the current image. In real-time
mode, press
or
or
key to exit B mode.
7.5.2 B/B mode
1. Press
key to enter B
/
B mode;
2. Switch the B/B image. In real-time mode, press
key to switch the display for left image or
right image. The switched image is activated and the other image is frozen;
3. Press freeze key to freeze or unfreeze the current image;
4. In real-time mode, press
or
or
key to exit B/B mode.
7.5.3 4B mode
Press
key to enter 4B mode and display the first real-time image, press
key again to
display the second real-time image while the first image is frozen. There are all together 4 images to
be displayed in sequence by pressing the 4B mode key, one image being activated and the other three
images frozen. Press this key repeatedly to switch images between “frozen” and “real-time”.
In real-time mode, press
or
or
key to exit 4B mode.
7.5.4 B/M mode
1. Press
key to enter B/M mode;
2. In real-time mode, press
keys to move sample line;
3. Press freeze key to freeze or unfreeze the current image;
4. In real-time B/M mode, press
or
or
or
key to exit B/M mode.
7.5.5 M mode
1. Press
key to enter B/M mode, press
key again to enter M mode;