Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 12 -
“Time set”, “Date Set”, “Date Format”, “Language”, “Video Format” and “CPU Temperture”, move
the cursor to
「
OK
」
then press
『
Set
』
key, the system will preserve the data of preset and exit the dialog
box; If choose
「
Cancel
」
, press
『
Set
』
key, the system will give up the data of preset and exit the dialog
box. You also can press
key to give up and exit the preset.
6.1.2 Formula preset
Move the cursor to the “Formula”, press
『
Set
』
key to show the “Formula” dialog box.
Move the cursor to the setting position of gestational week for the bovine, canine, equine, feline,
goat, llama, ovine and swine, press “Default”; then choose goat species or obstetric table for canine,
move the cursor to
「
OK
」
after finishing the preset and press
『
Set
』
key, the system will preserve those
data of preset and exit the dialog box; If you choose
「
Cancel
」
and press
『
Set
』
key, the system will give
up those data of preset and exit the dialog box. You also can press
key to give up and exit the
preset.
6.1.3 Net Setting
1. Move the cursor to the
『
Net Setting
』
, press
『
Set
』
key to show the “Net Setting” dialog box, the
setting is as shown below:
Use the following IP address
Set the IP address of full digital ultrasonic diagnostic instrument:
IP address:
IP address of KX5600 instrument;
LAN Server Set
Set LAN server’s network properties:
IP address: IP address of LAN server (that is IP address of PC installing print program);
TCP Port:
the default is 8866.
2. Finish the settings of LAN server and properly connected to the LAN;
3. Run the
on the PC;
4. Press
「
OK
」
in the Net Setting interface, press
『
Set
』
key, the screen pops up warning information
“Shut down and power on in 1 min”, after the instrument reboots, the lower right corner of the
screen will appear icon
, it indicates that the network connection is successful; If the
network is not connected successfully, please check the IP address and TCP port, as well as the
network cable is properly connected.
5. Choose
「
Cancel
」
press
『
Set
』
key or directly press
key to exit the net preset.
Warning:
After software upgraded, start the machine and must first click “Default”
in the “Formula” to restore the default values; otherwise obstetric table may occur
calculation error.