Kaiser KA 3 Series, User Manual, Page: 76 / 88

76
EN
Sleeping operation mode
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Press the SLEEP button, the
sleeping indicator light of indoor
unit flashes on.
After the setting of sleeping mode,
the cooling operation enables the
set temperature to increase 1 °C
after 1 hour and another 1 °C auto-
matically after 1 hour.
After the setting of sleeping mode,
the heating operation enables the
set temperature to drop 2°C after
1 hour and another 2°C automa-
tically after 1 hour.
The air-conditioner runs in sleeping
mode for 7 hours and stops auto-
matically.
Aim the remote controller towards
the receiver on the air-conditioner.
The remote controller should be
within 8 meters away from the
receiver.
No obstacles between the remote
controller and receiver.
Don’t drop or throw the remote
controller.
Don’t put the remote controller
under the forceful sunrays or heating
facilities and other heating sources.
Use two 7# batteries,don’t use the
electric batteries.
Take the batteries out of remote
controller before stop its using for long.
When the noise of transmitting
signal can’t be heard indoor unit
or the transmission symbol on
the display screen doesn’t flare,
batteries need be replaced.
If reset phenomenon occurs on
pressing the button of the remote
controller,the electric quantity is
deficient and new batteries need
to be substituted.
The waste battery should be dis-
posed properly.
Note: Press the MODE button or ON/OFF
button, the remote controller clears
sleeping mode away.
ATTENTION