40
GB
Using of thermoprobe
Electronic programming device
Logic control
allows switching off an oven after achievement of
desirable temperature inside of a dish. For this
purpose it is used a thermoprobe, which is
entering in the complete set of your oven.
For using the thermoprobe:
•
Insert the detachable connector of the
thermometer against the stop into a slot
inside of the oven. On the display will be
highlighted a temperature and a symbol
3
start blinking
•
Turn the knob of the
oven operating
functions
to choose a necessary mode.
Thus on the display will be lighting the
symbolical designation of a mode.
According to the chosen mode, the oven will
automatically establish the recommended
temperature and on the display appears a text
„
Oven … °C
“. After installation of the necessary
temperature of coocking on the display will be
lighted „
Thermoprobe:.. 00°C
“ for installation of
desirable temperature inside of a dish.
•
Press
keys
1
or
2
(
-
or
+
) to set the
temperature.
In 3 seconds the established parameters will be
remembered and an oven will be switched off.
If everything installed correctly, on the display
should be displayed:
- actual temperature inside of a dish,
- the established temperature inside of the dish,
- the established temperature inside of the oven.
3
1
2
Important!
While on the display flash an
inscription “
Thermoprobe: 00°C
”, the
oven waits for introduction of parameters!
