Kaisai Split ECO HOME, Operation Instructions Manual

Page: 18 / 38

Operation Instructions for Air-to-water Heat Pump Split ECO HOME Operation Instructions for Split Versati
15
SPLIT TYPE
(4) , or this setting without being
saved is ineffective.
(5) When the setting has been saved, activate the “ Clock Timer ” at the FUNCTION page.
[Notes]
(a) When “
Weekly timer
” and “
Clock timer
” settings are performed at the same time, the latter takes
precedence.
(b) When the water tank is available, the allowed running modes include “
Heat ”, “ Cool ”, “ Heat+ hot water ”,
“ Cool+hot water ”, and “ Hot water ”.
(c) When the water tank is unavailable, the allowed running modes only include “ Heat ” and “ Cool ”.
(d) When “ Clock timer ” has already been set and the concerned modes include “ Hot water ”, if resetting “ Water
tank
” from “
With
” to “
Without
”, then “
Hot water
” mode will be automatically changed to “
Heat
”, “
Cool+hot
water ”/ “ Heat+hot water ” changed to “ Cool ”/ “ Heat ”.
2.2.14 Temp. Timer
This function will make the unit run with certain temperature in a certain period within a day based on the user’s
actual demand.
[Operation Instructions]
(1) At the homepage, by pressing the Function key access to the FUNCTION page, and then locate
where “ Temp timer ” is, after that, press OK key to go to the TEMP TIMER setting page.
(2) At the TEMP TIMER setting page, by the Left/Right key select the desired parameter and then
by the Up/Down key Mode ”, “ Period 1 ”, “ WT-
HEAT 1 ”, “ Period 2 ” and “ WT-HEAT 2 ”.
(3) , or this setting without being
saved is ineffective.
(4) When the setting has been saved, activate the “ Temp. timer ” at the FUNCTION page.
[Notes]
(a) When “ Weekly timer ”, “ Clock timer ”, and “ Temp. timer ” settings are performed at the same time, the last
one takes precedence.
(b) This function works only when the unit is in operation.