KAESER M27, Operator'S Manual

Page: 234 / 294

Preparing a machine with a fixed chassis (with parking brake) for transport
1. Wind the jockey wheel to its uppermost position.
2. Check that the wheels are securely fitted and the tires are in good condition.
3. Check the tire pressures.
4. Connect the cable for the lighting and indicator systems and carry out a function check.
5. Release the parking brake:
(see Fig. 76).
■ Pull the brake lever a little further on and press the release button.
■ Hold the release button in and push the lever down past the dead point zone.
6. Install the contact breaking cable at the towing vehicle, see illustration 80.
7. Remove the chocks.
Preparing a machine with a fixed chassis (without parking brake) for transport
Fig. 78 Safety signs: Secure the chocks
1.
Missing chocks
Serious injury or death can result from an unsecured machine rolling away.
➤ Secure the chocks in the transport securing device before transporting the machine.
➤ Replace missing chocks immediately.
2. Raise the support to its uppermost position (end stop).
3. Check that the wheels are securely fitted and the tires are in good condition.
4. Check the tire pressures.
5. Attach the lighting and indicator systems and carry out a function check.
6. Remove the chocks and secure them in the transport securing device.
Replacement chocks can be purchased from KAESER representatives. A list is given at the
end of this manual. The part number of the chock is 5.1325.0.
Additional breakaway prevention
The tow bar may be provided with two safety chains as additional protection against breakaway
from the towing vehicle (country-specific optional equipment).
It is essential that both safety chains be attached to the towing vehicle before towing.
12 Decommissioning, Storage and Transport
12.2 Transport
224
Operator Manual Screw Compressor
M27
No.: 9_9548 05 USE
Option rc/ro/rr, rg/rp/rr,
rc/ro/rs
Option rd/ro/rr
Option rd/ro/rr
Option rb/rm/rr