Kaelus RT1000V01A-01N, Operating Manual, Page: 6 / 60

8.2.1.5 Overlay Plot (iQA) 27
8.2.1.6 Calibrate Button (iQA) 28
8.2.1.7 RF ON/OFF Button (iQA) 28
8.2.1.8 F1 Tone Frequency (iQA) 28
8.2.1.9 F2 Tone Frequency Range 28
8.2.1.10 Tone Output Powers 28
8.2.1.11 Maximum Range 28
8.2.1.12 PIM Product 28
8.2.1.13 Velocity Factor (VF) 28
8.2.3 iPA Analysis Window (Remote Control) 29
8.2.1.14 Test Point Label 29
8.2.1.15 Config Lock (iQA only) 29
8.2.1.16 Button Bar 29
8.2.1.17 HPA Temperature 29
8.2.2 iPA ANalysis Window (Local Control) 29
8.3 Performing an RTF Measurement 30
8.3.1 Calibrating the Instrument 30
8.3.2 Starting an RTF Sweep 30
8.4 Analyzing the Results of an RTF Sweep 31
8.4.1 Basic Display Mode 31
8.4.2 PIM , RL Marker, Zoom Functions and Enhanced Display (iPA) 32
8.4.2.1 Setting Enhanced Mode on the Local Display (iPA) 33
8.4.2.2 Setting Enhanced Mode on the Remote Display (iPA) 34
8.4.2.3 Zoom and Pan Control (iPA Local Display) 36
8.4.2.4 Zoom Control (iPA Remote Control using PC with Mouse) 37
8.4.2.5 Pan Control (iPAd Remote Control using Touch Screen Device) 40
8.4.3 PIM vs Distance Plot (iQA) 41
8.4.4 PIM vs Distance Plot (iPA Remote Display) 43
8.4.5 Return Loss vs Distance Plot 44
8.4.6 Overlay of PIM and Return Loss vs Distance Plots 47
8.5 Verifying the Accuracy of the Calibration 48
8.6 Changing the RTF Sweep Settings (iQA) 49
Operating Manual | Passive Intermodulation and Return Loss Fault Ranging Device
6