Figure 40 Settings screen
8.6.9 Applying the Factory Reset
1.
Press the Settings button on the main button bar. A new screen will be displayed as shown in Figure 40.
2. To reset the instrument to the default factory setup, press the Factory Reset button.
3.
To return to the RTF Analysis window press the Return button or the Config Mode Indicator button.
8.7
Changing the RTF Sweep Settings (iPA)
The iPA has a separate menu to adjust the sweep, power, distance and velocity factor settings, this is available as
indicated.
Operating Manual
|
Passive Intermodulation and Return Loss Fault Ranging Device
52