• Clean 7-16 connector mating surfaces on RTF module and iQA/iPA test set using a cotton bud and an isopropyl wipe
to remove dirt, dust & small metal filings. The cleaning kit supplied with the iQA/iPA accessories kit can be used for
this purpose.
• Reconnect RTF module to iQA/iPA.
• Clean 7-16 connector mating surface on test cable.
• Re-attach test cable to RTF module.
9.6
CE Declaration of Conformity
Hereby,
Kaelus Pty Ltd
34 Corporate Drive
Cannon Hill, QLD, 4170
AUSTRALIA
declares that the following products are in compliance with the essential requirements of Directive 2004/108/EC
(EMC Directive) and Directive 2006/95/EC (LVD Directive) if installed and operated in accordance with manufacturer’s
instructions.
Part Number
Model Number
Description
RT1000V01A-01N
RTF1000A
Range to Fault Test Set
RT2000V01A-01N
RTF2000A
Range to Fault Test Set
RT2600V01A-01N
RTF2600A
Range to Fault Test Set
These products are in conformity with the following European, harmonised and published standards at the date of this
declaration
Referenced EMC Standard
EN 61326-1:2006
EN 61000-4-4
EN 61326-2-1:2006
EN 61000-4-5
EN 55022:2010 “Class A”
EN 61000-4-6
EN 61000-4-2
EN 61000-4-11
EN 61000-4-3
Referenced Safety Standard
EN 61010-1:2010
EN 61010-030:2010
The design, development and manufacturing of Kaelus Pty Ltd products are controlled by an ISO 9001:2008 certified
Quality Management System.
Authorised representation within the EU is
Kaelus, 1 Aquarius Court, Viking Way, Rosyth, Scotland, KY11 2DW
Signed by the manufacturer at 34 Corporate Drive, Cannon Hill, QLD, Australia 4170 (the location of the technical file),
……………………………………..
Christine Blair
Engineering Director
Kaelus Pty Ltd
10th September 2013
ID: EUTA2036A1
59
© 2017 Infinite Electronics, Inc., All Rights Reserved.