Kadee RC, User Manual, Page: 8 / 24

8
2 Basic Operation
2.1 Wake System
Hold
the [On/Off] Key for at least three seconds or until the
Display shows “On”. The Transmitter will turn on and search for
any Bound receivers.
When the Display shows that the System is Ready, the System is
awake and ready to use.
Note: The Display will turn off after 5 minutes of no activity. Press
any key to turn on the Display.
2.2 Address a Receiver
Note: Before a Receiver can receive commands it must be addressed.
Key in the Receiver’s two digit address.
Example:
Key in (01). Receiver 01 will now accept commands.
Operate Servo by pressing the [*] Key.
Operate the Receivers internal Relay by pressing the [#] Key.
Note: After one hour of no activity the Relays will go to sleep. (see
Send Wake Command) Sec. 3.2.5
2.3 System Sleep
To put the entire System to Sleep manually:
Hold the [On/Off] Key for three seconds or until the Display shows “OFF”.
Note: You must be in basic operation to put system to sleep.
Tip: At any time you can Hold the [END] key for one second to
clear the Display and return to basic operation.