Kadee RC User Manual Download Page 21

21

This warranty does not cover: normal wear and tear, cosmetic or physical 
damage to the surface of the product, including cracks or scratches. Any 
damage due to improper installation, operation, maintenance, handling, 
accident, fire, water or liquids, power changes, abuse, alteration, modification, 
negligence, battery leak, damage caused by third parties, damage due to 
attempted repair by anyone other than Kadee, acts of God, devices purchased 
from anyone other than an authorized retailer or distributor or devices that have 
been previously registered.

This warranty is considered void if the product case has been opened or the 
protective wrap has been removed by anyone other than Kadee.

Any device needing to be returned to Kadee must have a return merchandise 
authorization (RMA) number. Any device received at Kadee without a valid 
RMA number will be returned to the sender at sender’s expense. RMA numbers 
are valid for (10) business days.

Kadee reserves the right to inspect any and all equipment involved in a warranty 
claim. Repair or replacement decisions are at the sole discretion of Kadee.

A technical representative will be able to determine if the device is defective 
and still under the limited warranty period. It also may be necessary for the 
device to be sent for evaluation to determine the validity of the warranty claim.

If the device is not deemed defective or is out of the limited warranty period, 
you may be given the option to repair the device for a fee or have the device 
returned as is at your expense.

DISCLAIMER:

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY 
IS YOUR EXCLUSIVE REMEDY. THIS WARRANTY IS IN LIEU OF ALL 
OTHER EXPRESS OR IMPLIED WARRANTIES. KADEE SHALL NOT 
BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR 
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT 
PROHIBITED BY LAW, ANY IMPLIED WARRANTY, INCLUDING THE 
WARRANTY OF MERCHANTABILITY OR THE WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN 
DURATION TO THE TERM OF THIS WARRANTY. Some states/countries do 
not allow limitations of how long an implied warranty lasts or the exclusion or 
limitation of such damages, so these limitations and exclusions may not apply 
to you. This warranty gives the consumer specific legal rights and you may 
also have other rights which vary from location to location. If any portion of this 
warranty is held to be invalid or unenforceable for any reason, such finding will 
not invalidate any other provision.

Summary of Contents for RC

























Reviews: