6
The Kadee
®
Remote Control is comprised of a Transmitter that
sends commands to a Receiver. After a Receiver successfully
completes a command, the Transmitter Display will indicate that
the command has been completed. (Sec. 1.2)
Before a Receiver can receive commands it must be Bound to a
Transmitter and given a two digit address. (Sec. 3.2.3)
A Receiver can carry out the following commands:
Operate a standard hobby servo (Sec. 4.1)
Actuate an “on board” Relay (Sec. 4.2).
Quick Start (Sec. 1.3) will get you up and running in no time and
Typical Applications (Sec. 4) will guide you in some of the more
common uses.
Advanced Operations (Sec. 3) will go more in depth into
customizing the Kadee
®
Remote Control.
1.2 Display
1) The left “Mode Prompt” indicated the currently selected Mode.
2) The center and right digits indicate the Receivers Address.
3) The left “Servo Indicator” shows that the Servo is actuated.
4) The right “Relay Indicator” shows that the Relay is actuated.
The above example shows that: Receiver 01 is in Tandem mode
with both the Servo and Relay actuated.
1. Mode Prompt
2. Two Digit
Address Number
3. Relay Function Indicator
4. Servo Function Indicator
Summary of Contents for RC
Page 1: ...Transmitter User Guide...