EN
blueplanet hybrid 10.0 TL3
Page 40
The battery has a SOC of 100% and is in standby mode. The excess current is supplied to the grid.
Fig. 41: Battery in standby mode
8.3.3
Selection menu
Use the selection menu to display device information. The hy-switch and battery mode can be activated in this way
The selection menu is displayed by briefly pressing the red "Set" button. The active element is marked with a frame (posi-
tion marker). In the selection menu, you can jump to the next selection by briefly pressing the "Set" button. To select and
activate a menu, press and hold the "Set" button for about 2 seconds. The selection menu is exited with the back symbol
(Exit).
Fig. 42: Selection
Selection for device information
Fig. 43: Information
The information field shows: Versions of the individual software units (control, communication, blueplanet hy-switch),
current date and time, the current temperature in the device, the currently assigned IP address, the serial number of the
device and its MAC address The information field closes when the "Set" button is pressed briefly.
Battery in standby mode
Position marker
Information
