EN
blueplanet hybrid 10.0 TL3
Page 21
CAUTION
Avoid damage due to hard striking!
Hard hitting or an uneven surface can damage the device, especially the
heat sink.
Fig. 11: Position of the safety screws (on left and right side)
2.
After attaching the device to the wall bracket, screw in the
countersunk screw [ T_TX20/ 1.5 Nm] on both sides to fix it. Make sure that the bottom of the housing can-
not be moved forward.
»
The device is successfully installed.
CAUTION
Safety catch
The safety screws are used to prevent the device from being accidentally unhooked.
›
This screw connection may only be removed for disassembly!
