![background image](http://html.mh-extra.com/html/kaba/access-manager-92-30/access-manager-92-30_technical-manual_649058072.webp)
Start-up
Technical Manual
72
04045376 - 05/2016
Kaba access manager 92 30
6.3.2
Perform a cold start and set the default IP address 123.0.0.2
When performing a cold start, parameters are reset to their default values. Master
records and booking records are deleted.
1. Turn off the device.
2. Turn on the device.
ð
The yellow status LED is lit.
ð
After approx. 40 seconds, the yellow status LED starts flashing.
3. Within 10 seconds, press the reset key and keep it depressed.
ð
The status LED flashes faster for 5 seconds.
ð
The status LED lights up in green for 2 seconds.
ð
A cold start was performed.
ð
The status LED lights up briefly in red and then flashes in red for 5 seconds.
ð
The status LED flashes in green for 2 seconds.
ð
The default IP address 123.0.0.2 has been set.
4. Release the reset key again.
ð
The status LED is lit in green.
ð
The system is ready for use, a cold start was performed, and the default IP ad-
dress 123.0.0.2 was set.
6.3.3
Setting the default IP address 123.0.0.2 (without cold start)
1. Turn off the device.
2. Turn on the device.
ð
The yellow status LED is lit.
ð
After approx. 40 seconds, the yellow status LED starts flashing.
ð
After another 10 seconds, the red status LED is lit.
3. Within 5 seconds, press the reset key and keep it depressed.
ð
The status LED flashes faster for 5 seconds.
ð
The status LED flashes green for 2 seconds.
ð
The default IP address 123.0.0.2 has been set.
4. Release the reset key again.
ð
The green status LED is lit.
ð
The system is ready for use, the default IP address 123.0.0.2 was set.