Technical Manual
Start-up
81
04045376 - 05/2016
Kaba access manager 92 30
6.5.4
Changing network parameters
After selecting a device in the list, the current version of the installed terminal soft-
ware is additionally indicated.
Furthermore the network parameters are displayed. IP address, net mask and gate-
way can be changed, if required.
Assigning a new IP address and disabling the host registration
1. Select the device to be changed in the list.
2. Enable the "Set static IP address" check box.
ð
The input fields are active.
3. Enter IP address and net mask.
4. Enter gateway. Enter "0.0.0.0" if no gateway is to be set or leave the field blank.
5. Leave the "Disable Host Registration" check box enabled.
6. Click the “Submit” button.
ð
The selected device applies the settings and executes a restart with disabled host
registration.
When changing network settings please make sure that the values are entered cor-
rectly in the fields. Invalid values are not applied by "Submit" and a corresponding
message is output.
The device does not send feedback to the Device Discovery Tool. After clicking the
"Submit" button you can exit the program.
Disabling host registration and maintaining network parameters
1. Leave the "Disable Host Registration" check box enabled.
2. Leave the "Set static IP address" check box disabled.
3. Click the “Submit” button.
ð
The selected device executes a restart with disabled host registration.
Irrespective of any previously entered values the device network settings are not
changed.
Do not make any changes, since host registration is supposed to remain
enabled
1. Click the “Exit” button.
ð
The program is closed.
