background image

Kaba Access Control warrants this product to be free from defects in material 

and workmanship under normal use and service for a period of three (3) years.  

Kaba Access Control will repair or replace, at our discretion, 5000 Series Locks 

found by Kaba Access Control analysis to be defective during this period.  Our 

only liability, whether in tort or in contract, under this warranty is to repair or 

replace products that are returned to Kaba Access Control within the three (3) 

year warranty period.

This warranty is in lieu of and not in addition to any other warranty or condition, 

express or implied, including without limitation merchantability, fitness for pur-

pose or absence of latent defects.

ATTENTION: This warranty does not cover problems arising out of improper 

installation, neglect or misuse.  All warranties implied or written will be null and 

void if the lock is not installed properly and / or if any supplied component part is 

substituted with a foreign part.  If the lock is used with a wall bumper, the war-

ranty is null and void.  If a doorstop is required, we recommend the use of a 

floor secured stop.

The environment and conditions of use determine the life of finishes  

on Kaba Access Control products.  Finishes on Kaba Access Control products 

are subject to change due to wear and environmental  

corrosion. Kaba Access Control cannot be held responsible for the  

deterioration of finishes.

Authorization to Return Goods

Returned merchandise will not be accepted without prior approval. Approvals 

and Returned Goods Authorization Numbers (RGA Numbers) for the 5000 

Series are available through our Customer Service department in Winston-

Salem, NC (800) 849-8324.  The serial number of a lock is required to obtain 

this RGA Number.  The issuance of an RGA does not imply that a credit or 

replacement will be issued.

The RGA number must be included on the address label when material  

is returned to the factory. All component parts including latches and strikes (even 

if not inoperative) must be included in the package with return. All merchandise 

must be returned prepaid and properly packaged  

to the address indicated.

*  Simplex 5000 locks are warranted three (3) years from date of purchase.  

E-Plex 5x00 locks are warranted three (3) years from date of activation.

KABA SIMPLEX

®

/E-PLEX

®

 5x00 SERIES 

LIMITED WARRANTY

Summary of Contents for 5 00 Series




















Reviews: