12
b
e
I-3 Insert the supplied tailpiece (e) vertically into the
outside lever/knob (b) as shown. Make certain that
you rotate the tailpiece so it will align with the inter-
changeable core. For screw cap type cylinders
(Schlage) (g), the tailpiece must be assembled
to the cylinder first with the tailpiece vertically as
shown. Insert the core into the outside lever/knob.
Note: To remove the outside lever/knob from
the outside unit assembly, follow steps below.
I-4 Remove the interchangeable core (g).
Then remove the tailpiece (e).
Note: You may want to use needle nose
pliers for some tailpieces.
I-5 Insert the release tool (d) into the
small hole (f) under lever/knob as
shown. Gently push lever catch up
until it clicks. Remove tool (d), then
remove outside lever/knob (a).
I-6 For ASSA/Medeco/Yale
interchangeable/removable cylinders, the
tailpiece must be prepped for the desired length
before installation.
When using a Yale cylinder on a
cylindrical latch application, measure the
door thickness of the intended application.
I-7 Notice the score marks on the flat portion
of the ASSA/Medeco/Yale tailpiece. Using
the diagram below, locate the score mark
on your tailpiece that matches your
cylinder prep for the intended application,
and break the tailpiece off accordingly.
vertical
g
b
e
a
f
d
a
f
d
e
g
