23
Safety Precautions
Be sure to read and understand the instructions before using your K-Sun® BEE3®-EZ or
BEE3®-EZ+ printer and keep this manual handy for future reference. Safety precautions
are marked as:
DANGER – Safety precaution, which if ignored, will result in serious or fatal personal injury.
Use extra caution in performing any procedure preceded by a DANGER heading.
WARNING – Safety precaution which, if ignored, could result in serious or fatal personal injury.
CAUTION – Safety precaution, which if ignored, could result in damage to equipment.
DANGER
Leaking batteries – If liquid from leaking batteries gets into your eyes, DO NOT RUB YOUR
EYES! Wash your hands well with clean water and contact a doctor immediately.
WARNING
- Adapter
Use only the adapter recommended and designed for use with this product. Only use the
K-Sun® APT0615Y1-1 adapter.
Using the wrong adapter may cause damage to your printer, overheating, fire or electric
shock. Be sure to use the AC adapter with the proper voltage. Using it with other voltage
levels may cause fire, smoke, overheating or electric shock. Do not pull the AC adapter cord
excessively or put a heavy object on it. This may cause fire or electric shock.
Unplug the AC Adapter from both the device and the outlet after use. This may prevent
possible accidents caused by tripping over the cord.
WARNING
- Battery
Do not use batteries with the + and – terminals reversed. This may cause leakage, overheating
or explosion. If liquid from battery enters your mouth, rinse immediately with plenty of water
and consult a doctor. If liquid from battery comes in contact with your skin or cloth, wash away
with water. This may cause damage to your skin. Do not mix new batteries and old batteries or
different types of batteries together. Doing so may cause leakage, overheating or explosion.
When batteries run down, take them out of device immediately. If a battery is left inside the
device for long periods, gas emitted from the battery may cause leakage, overheating,
explosion or damage to the printer. If you do not use the K-Sun® BEE3®-EZ or BEE3®-EZ+
printer for an extended period, take the batteries out of the device. Misuse of the batteries may
cause leakage, overheating, explosion, injury or damage to the printer. Dispose of used
batteries according to local regulations.
WARNING
- Other
Do not step on, drop, hit or have strong impact on the printer. This may cause fire or electric
shock. If your K-Sun® BEE3®-EZ or EZ+ is damaged, turn the power off, remove the AC
adapter from the electrical outlet and contact your local distributor regarding repair. Using
the damaged device may cause fire and electric shock.
Do not touch the device, the AC adapter, or the plug with wet hands. This may cause
malfunction, fire or electric shock.
Saf
et
y P
rec
autions