4
1. Tighten the ribbon.
2. Open the cover
3. Insert the cartridge.
a. Insert the cartridge with its label side up.
b. Straighten the tape end.
c. Push the tape end through the tape guide
4. Close the cover.
Note:
How to remove the tape cartridge
To remove, place your fingers on the tabs provided on both sides of the
cartridge as shown in the figure, lift the tabs straight up to pull out the
cartridge.
Printer Set-Up
1
2
3
a
b
c
4
5. Connect the adapter to the printer. Connect the cord to
the adapter then plug into the wall outlet. USE ONLY
ADAPTER MARKED K-Sun® APT0615Y1-1
6. Turn on printer.
7. Feed and cut the tape to clear slack in
ribbon and tape. Press Shift and the
Print/FeedCut key. Display will say
“Feed & Cut.” Press Return and tape
will feed and cut.
Note:
For supplies that require manual cutting (using scissors), Use the down
Arrow key at Feed
& Cut. Your screen will say “Feed.” Press Return and tape will feed.
6
7
Prin
ter S
et-Up
Feed/Cut
5
