PELLET BURNING STOVES INSTALLATION & MAINTENANCE MANUAL
34
stove.
6. PROBLEMS / CAUSES / SOLUTIONS
NOTE: All repairs must be performed by a technician with the stove off and disconnected the mains.
The control panel of the stove has trouble examine sensors. When the sensor detect the abnormal work temperature
(below 40˚C), or the other sensor’s temperature is above 70˚C the auto-control temperature switches will react
accordingly. When temperature is below 30˚C, the safety control system will stop the stove automatically; when the
other sensor, fixed into the hopper, detect the temperature is above 70˚C, the stove will be shut down.
The general troubles, the possible reasons and the solutions are as following, after solving problems, start the stove
again:
problems
reason
solution
1. The start light does not
light when power is on
No power in stove or in the
control panel.
Check the power and wires.
2. The blower doesn’t
work after pressing the
start bottom. (option with
It is normal.
It will start automatically when
the temperature is above 30
Please wait