K.M.E. VSS 18, User Manual

Page: 9 / 36

9
8. Operation
All these components must be set directly on the hardware device.
The adjustable parameters in the submenu “user presets” for Bass / Out A / Out B are
identical.
The names of the menu points refer to the user navigation on the device.
Main Menu
•
Pot Lock Mode
[to be activated by using “lock function”, see page 15]
All Channels locked
[all volume pots locked]
Tops only
[just lock the volume pots for Out A and Out B]
Channel A
[just lock volume pot for out A]
Channel B
[just lock volume pot for out B]
In this menu you can set four different „lock - functions“ for the three volume pots of the
VSS 18.
•
Sig LED Threshold
Here you set the Threshold value where the LED starts to light green when the set value is
reached by the audio signal.
•
User LED Threshold
Here you set the Threshold value where the LED starts to light blue when the set value is
reached by the audio signal.
•
Display Mode
Output Levels
[output level display]
Operation Parameters
[input level display and operation display]
You can chose between two layouts of the LCD graphic display. The first one shows the output
levels and the other one gives an overview about input levels and temperature of the amplifier
and PSU (PowerSupplyUnit). If the unit is muted, the operation parameter screen is displayed
automatically.
•
Diagnostics
In this menu you can read out the current software version.
•
Factory Reset
Device Settings only
[Restore all adjustable parameters in the main menu]
All (incl.Presets)
[Reset all changes made, incl. all user presets]
To reset the unit to the programmed initial state there are two “levels”, just to restore only the
parameters adjustable in the main menu or all menu items (incl. all user presets). After resetting
all changed settings are turned to the programmed initial state!
•
System Menu
Input 1 AD
(see page 13)
Analog
[switch input of channel A to analogue]
Digital
[switch input of channel A to digital]
Digital X
[switch input of channel A to digital X]
In this menu item you switch the input of channel A to analogue or digital or digital X. Digital X
causes a swaping of the left resp. right “audio-channel” of the digital signal on the input of
VSS 18, e.g. for the digital controlling of SD 7 and SD 8 (for the left and right side).
Password
(see page 14)
In this menu item you can enter an 8-digit password. If you have enterd a password and
activate the “lock function” you must enter the password again to unlock the unit.
LCD Brightness
[adjust brightness of the LCD graphic display]
LCD Contrast
[adjust contrast of the LCD graphic display]