K.M.E. VSS 18, User Manual, Page: 17 / 36

17
12. General view about presets
Currently the VSS 18 includes eight factory presets and four useful adjusted user
presets. When switching on for the first time preset 1 “SD 7 OMNI” is loaded (a factory
preset). You can load factory presets and change them. How it can be made you will find
on page 9 – 11 in this manual. The menu item „Userpresets“ appears only from preset
no. 9 to 12, where you can set and adjust the parameters like limiter, EQs, delays for the
outputs.
The names of the presets (listed below) refer to the menu navigation of the device.
Factorypresets:
Preset 01 „SD7 OMNI“
Preset 02 „SD8 OMNI”
Preset 03 „CARDIOID 1”
Preset 04 „CARDIOID 2”
Preset 05 „CARDIOID 3”
Preset 06 „SINGLE BASS”
Preset 07 „TOPS ONLY”
Preset 08 „BASS ARRAY”
Userpresets:
Preset 09 „USER SMALLPA”
Preset 10 „USER PA+DLY”
Preset 11 „USER BSM 1”
Preset 12 „USER BSM 2”
12.1 Factory presets - are not adjustable and erasable
Preset 1: SD7 OMNI
for
top units
for
passive
top units
front
back
0°
90°
180°
270°
300°
330°
240°
210°
120°
150°
30°
60°
omnidirectional
dispersion of
the subwoofers:
2x VSS 18 + 2x VB 18 + 2x VL 750:
analogue or digital audio signal each to input A of the VSS 18 & link it through the top units
(e.g. with a dual-cable from K.M.E., includes audio signal & power supply);
Out A is the speaker output for the passive subwoofer VB 18, Out B can be chosen as speaker
output for a passive top unit (crossover frequency 120 Hz)