K.M.E. VSS 18, User Manual

Page: 10 / 36

10
•
User Presets
[appears only from preset no. 9 to 12]
Names
Preset Name
[enter preset name, max. 12 digits]
Out A Name
[enter name of output A, max. 6 digits]
Out B Name
[enter name of output A, max. 6 digits]
Bass
Routing
[routing of the input channels]
A(a)/L(d)/R(dx)
B(a)/R(d)/L(dx)
A+B(a)/L+R(dx)
B (analog) always
The routing of channel A and B offers four possibilities:
1. analogue (left) or digital (left) or digital crossed (right)
2. analogue (right) or digital (right) or digital crossed (left)
3. analogue (left + right) or digital (left + right)
4. input B always analogue
Delay
[adjust delay, in 10 cm steps]
Crossover Low Cut
(high pass)
[crossover function]
Type
(Subsonic-Filter 12 dB Q=1,2 or 12 dB/Oktave or 24 dB/Oktave)
Frequency
This digital filter (crossover) limits the frequency range above the adjustable crossover
frequency with a selectable slope of 12db/octave or 24 dB/octave. You can not deactivate this
digital filter. When you need a full-range audio signal on the outputs A + B you should set the
frequency to 25 Hz and choose a type of the low cut filter.
Crossover High Cut
(low-pass)
[crossover function]
Type
(Off or 12 dB/Oktave or 24 dB/Oktave)
Frequency
This digital filter (crossover) limits the frequency range below the adjustable crossover
frequency with a selectable slope of 12db/octave or 24 dB/octave.
This filter can be deactivated (Off).
Equalizer 1
[adjust equalizer]
Frequency
Gain
Q
(bandwidth)
With this digital filter (parametr. EQ) you can affect the frequency range by making adjustments
of filter frequency (center frequency), the Gain (boost resp. cut) and the Q-factor (bandwidth).
If you adjust the sensitivity (Gain) to 0 dB you deactivate this filter.
Equalizer 5
[adjust equalizer]
Frequency
Gain
Q
(bandwidth)
See adjustable parameters Equalizer 1.
Output Phase
[adjust output phase, you can choose between „in phase” or „out of
phase 180°”]
Output Level
[adjust output level, it is independent to the adjustment of the
volume pots]