K.M.E. VSS 18, User Manual

Page: 13 / 36

13
10.3 Switching input of channel A between analog / digital / digital X
If you want to control your PA system with a digital signal you have to switch the input of
channel A to „digital“ resp. “digital X” (see page 9). In the programmed initial state all
inputs are switched to „analogue“.
1.
4.
7.
10.
2.
5.
8.
3.
6.
9.
Press the marked arrow keys of the navigation-pad one after another (like shown in the scheme),
to switch the input of channel A to „analogue“ / „digital“ resp. „digital X” (the selection can be
looked up from the LCD display from the respective direction of arrow). After the correct selection
of the input of channel A press the OK-button and leave the menu with the left arrow key.
10.4 The „Mute- function”
This function enables to mute the PA system with just one touch of a button.
Press for 1 second the marked arrow key of the navigation pad to mute the PA system.
A repeated pressing of this arrow key causes the deactivation of the mute-function (see display).