User information
Angled mincer WW 130/160
WWD130
10.06.2022
Speicherdatum 10.06.2022 11:53:00
Seite 10
3 Safety measures
3.1
Safety devices and their safety functions
3.1.1 Main switch
The main switch (Fig. 1, Item. 7) isolates the machine (with the
exception of the connection terminal and cable to the main switch)
from the mains and when switched off deactivates all functions. The
main switch should be switched to “I” before starting up and to “0”
when shutting down. It can be secured with a padlock. The push-
buttons on the control panel must be used for switching during
normal operation, since otherwise safety functions could be
deactivated.
3.1.2 Covering
The drive side and the electrical parts are secured against access
by the housing and screwed down doors and covers. Before the
doors or cover are opened, the main switch must be set to “0”. The
machine may only be operated with a fully enclosed housing.
3.1.3 Protective grating
The protective grating (Fig. 1, Pos. 1) blocks access to the
dangerous regions in the funnel of the mincer. The mincer can only
be operated with the protective grating closed. A safety switch
monitors the closed position of the protective grating. The meat
mincer switches off if the protective grating is opened during
operation.
3.1.4 Discharge guard
The discharge guard (Fig. 1, Pos. 8) covers the discharge of the
mincer. The mincer can only be operated with the discharge guard
closed. A safety switch monitors the closed position. The meat
mincer switches off if the discharge
guard is opened. It is prohibited to reach into the discharge past the
discharge guard.
3.1.5 Worm ejector
The worm ejector (Fig. 1, Pos. 11) pushes the working worm and
