14
2 Getting Started
This chapter describes the proper installation environment, installation procedures, its
package contents and basic information user should be aware of.
NOTE: Diagrams and images of equipment mentioned are used for reference only. Actual
system configuration and specs may vary.
2.1 Installation Environment
Whenever unpacking and preparing to install any equipment described in this manual,
please refer to the Important Safety Instructions chapter of this manual.
Only install equipment in well lit areas on flat, sturdy surfaces with access to basic tools such
as flat and cross head screwdrivers, preferably with magnetic heads as screws and standoffs
are small and easily misplaced.
Recommended Installation Tools
• Philips (cross-head_ screwdriver
•
Flat-head screwdriver
• Anti-static wrist strap
• Anti-static mat
The PCI/PXI-69816/26/46 contain several electro-static sensitive components that can be
easily be damaged by static electricity. The equipment should be handled on a grounded
anti-static mat and the operator should wear an anti-static wristband during the unpacking
and installation procedure.
Please also inspect the components for apparent damage. Improper shipping and handling
may cause damage to the components. Be sure this is no shipping and handling damage on
the components before continuing.
The equipment must be protected from static discharge and physical shock.
Never remove any of the socketed parts except at a static-free workstation. Use
the antistatic bag shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing.
2�2 Package Contents
Before continuing, check the package contents for any damage and check if the following
items are included in the packaging:
• PCI/PXI-69816/26/46 digitizer card
Do not install or apply power to equipment that is damaged or if there is missing/
incomplete equipment. Retain the shipping carton and packing materials for
inspection. Please contact your JYTEK immediately for assistance. Obtain
authorization before returning any product to JYTEK.
