41
Important Safety Instructions
Please read and follow all instructions marked on the product and in the documentation
before operating the system. Retain all safety and operating instructions for future use.
• Please read these safety instructions carefully.
• Please keep this User’s Manual for future reference.
• The equipment should be operated in an ambient temperature between 0 to 50
o
C.
• The equipment should be operated only from the type of power source indicated
on the rating label. Make sure the voltage of the power source is correct when
connecting the equipment to the power outlet.
• If the user’s equipment has a voltage selector switch, make sure that the switch is set
to the proper position for the area. The voltage selector switch is set at the factory
to the correct voltage.
• For pluggable equipment, ensure they are installed near a socket-outlet that is easily
accessible.
• Secure the power cord to prevent unnecessary accidents. Do not place anything over
the power cord.
• If the equipment will not be in use for long periods of time, disconnect the equipment
from mains to avoid being damaged by transient overvoltage.
• All cautions and warnings on the equipment should be noted.
• Please keep this equipment away from humidity.
• Do not use this equipment near water or a heat source.
• Place this equipment on a reliable surface when installing. A drop or fall could cause
injury.
• Never pour any liquid into the opening, this could cause fire or electrical shock.
• Openings in the case are provided for ventilation. Do not block or cover these
openings. Make sure there is adequate space around the system for ventilation
when setting up the work area. Never insert objects of any kind into the ventilation
openings.
• To avoid electrical shock, always unplug all power and modem cables from the wall
outlets before removing covers.
• Lithium Battery provided (real time clock battery)
Risk of explosion if battery is replaced by an incorrect type. Dispose used batteries
as instructed in the instructions”
• The equipment should be checked by service personnel if one of the following
situation arises:
◦ The power cord or plug is damaged.
