17
2.4 Installing the module
To install the PXI-69816/PXI-69826/PXI-69846 module:
1. Turn off the PXI system/chassis and disconnect the power plug from the power
source.
2. Align the module’s edge with the card guide in the PXI chassis.
3. Slide the module into the chassis, until resistance is felt from the PXI connector.
4. Push the ejector upwards and fully insert the module into the chassis.
5. Once inserted, a “click” can be heard from the ejector latch.
6. Tighten the screw on the front panel.
7. Power on the PXI system/chassis.
To remove the module, reverse step 2 through 6 above.
To install the PCI-69816/PCI-69826/PCI-69846 module:
1. Turn off your computer
2. Remove the top cover of your computer
3. Select an available PCI slot and remove the bracket retaining screw and the bracket
cover.
4. Line up the PCI digitizer with the PCI slot on the backpanel. Slowly push down on the
top of the PCI digitizer until its card-edge connector is resting on the slot receptacle.
5. Reinstall the bracket-retaining screw to secure the PCI digitizer to the back panel rail.
6. Restore the computer cover.
