XV-FA90BK/XV-FA92SL/XV-FA95GD
1-24
Adjustment method
(1) Test mode setting method
(2) Initialization method
(4) Method of displaying version of microcomputer
Please initialize according to the following procedures when microprocessor or pick-up is
exchanged and when the up-grade is done.
1)Take out the disc and close the tray.
2)Unplug the power plug.
3)Insert power plug into outlet while pressing both "PLAY" button and "STOP" button of the main body.
4)The player displays "TEST " on the FL display. keeps pushing the button until this is displayed.
" " means the player version.
5)When the power supply is turned off, test mode is released.
1)Makes to test mode.
2)After "FORWARD SKIP" button ( ) of the main body is pushed, "PAUSE" button is pushed.
3)DVD AUDIO indicator lights when about ten seconds pass. Then, it is initialization completion.
1)Makes to test mode and initializes
2)When "CHOICE" button of remote controller is pushed twice, the figure is displayed on the FL display as follows.
4 5 _ 3 3 _ 4 5 _ F 0
FL Display
FL Display microcomputer (IC801)
Front end microcomputer (IC401)
Microcode of decoder
Decoder part (IC509)
POWER
Button
STOP Button
(for test mode)
FORWARD SKIP Button
(for initialize)
PLAY Button
(for test mode or display of jitter value)
PAUSE Button
(automatic adjustment
or initialize)
FL Display
DVD AUDIO
Indicator
(for initialize)
The mode changes as follows whenever the "CHOICE" button of remote controller is pushed in test mode.
Becomes test mode
Device key index
Version of microcomputer
Check mode
Confirmation of FL display
Not use mode
TEST_ _ -----------------------
--------
_ _ _ ------------
CHECK ---------------------------------
FL display becomes all lighting ---
EXPERT ---------------------------------
(3) Method of displaying device key index
1)Makes to test mode and initializes.
2)When "CHOICE" button of remote controller is pushed once, the device key index is displayed on the
FL display as follows.
FL Display
is a figure or an alphabet.
CHOICE Button
(switch of mode)
TOP MENU Button
(laser ON)
BACK SKIP Button
(display of current value)
CURSOR UP Button
(firmware upgrade)
