XV-FA90BK/XV-FA92SL/XV-FA95GD
1-16
Prior to performing the following procedure, remove
the traverse mechanism unit.
Disconnect the card wire extending from the turn
table assembly, from connector CN201 on the pickup
board.
Remove the screw
E
attaching the shaft stopper (F)
on the upper side of the traverse mechanism unit.
Pull the side of the shaft stopper (F) outward to
release the joint
h
and remove it upward. Remove
the spring at the same time.
Remove the screw
F
attaching the turn table
assembly.
Move the turn table assembly outward and pull out
from the shaft. Then remove it from the base chassis.
1.
2.
3.
4.
Removing the turn table assembly
(See Fig.6, 8 and 9)
Fig.8
Fig.9
Turn table assembly
Turn table assembly
Shaft stopper (F)
Shaft stopper (F)
Shaft
Shaft
Joint h
Shaft stopper (F)
E
F
F
E
E
Traverse mechanism unit
Base chassis
Fig.6
Pickup board
CN101
CN201
Spring
