JVC XM-P55, Service Manual

Page: 26 / 78

XM-P55
XM-PJ1
2-24
Command data1 data2 data3 data4 data5 data6 data7
Ope.mode State PLY P REC P EEP R EEP S
Self diagnosis Function of MD
Power Supply ------------- Use to a battery charger by more than 1.3volt
Establishment ------------ Set up the horizontal
1. The method of changing to the self-diagnosis mode turns off
the power supply of the main body first.
2. The power supply of the main body is turned on while pushing
"PLA.B.BASS "of the remote control unit at the same time.
3. It changes into the self-diagnosis mode, and the self-diagnosis starts.
Test 's Command for the self-diagnosis mode
=00: Wait to Test command
=DD: Going to Resume's EEPROM initialize
=DE: Going to servo's EEPROM initialize
=E2: Turn on the leaser of PLAY
=D3: Turn up the laser
=D4: Turn down the laser
=D1: Turn off the laser
=D5: Rewind to the FEED
=D6: Adjust to the PRE DISC
=D7: Adjust to the MO DISC
=92: Break out the trouble
The following are displayed
and it stops at the NG generation.
The KEY input afterwards
is disregarded.
Disc
mark
Random
Repeat
FAV
DISPLAY button
A.C.BASS
(Active Clear Bass) button
Play Mode butto
n
[Indicators on the display
of the remote control]
VOL
JOG
MODE
A.C.BASS
BASS
MONO
Battery