JVC XM-P55, Service Manual

Page: 15 / 78

XM-P55
XM-PJ1
2-13
Removing the Main Board
(See Fig.5 to 7)
1.
2.
3.
4.
5.
6.
Remove the three C screws and the screw D attaching
the main board.
Unsolder the part c of the battery terminal.
Open the battery lid and remove it from the flame
assembly.
Remove the headphone jack assembly while pulling the
cabinet assembly of the headphone jack outwards.
Move the main board in the direction of the arrow in Fig.6
and remove it upward from the two parts d of the
bending on the flame assembly.
Disconnect the flexible harnesses from connector CN300
and CN401 on the reverse side of the main board.
Fig.5
Fig.6
Fig.7
Hold switch
Main board
Part c : unsoldering
Main board
Headphone jack assembly
Flame assembly
Parts d
Battery lid
CN300
CN401
Main board
C
C
D