JVC XM-P55, Service Manual

Page: 23 / 78

XM-P55
XM-PJ1
2-21
1.
2.
3.
4.
5.
6.
Prior to performing the following procedures, fold the
flexible harness of the pickup unit (see Fig.7,8 and 9). Fix
the flexible harness with a spacer not to unfold.
Attach the U-shaped slot of the pickup marked ’e’ to the
guide base.
For the shaft, firstly attach its shaft base side and next
attach its feed motor base side.
Attach a spacer to the folded flexible harness and fix the
flexible harness to the chassis assembly (see Fig.7, 8).
Attach a spacer between the chassis boss and the
flexible harness (see Fig.9).
Make sure that the flexible harness is folded fast and
fixed to the right position.
<Reassembling the Pickup Unit>
Fig.8
(Fold fast.) (Attach a spacer.) (Fix fast not to unfold.) (Fold fast.)
Attach a spacer
Chassis assembly
Attach a spacer
Chassis boss
Flexible harness
Spacer
Spacer
Chassis boss
Attach this position
Part e
Hold spring
Pickup unit
Shaft
Guide base
Feed motor
B
Fig.9
Fig.5
Fig.7