manualshive.com logo in svg

JVC VR-716E, Instructions Manual, Page: 44 / 118

Share
Download
JVC VR-716E Instructions Manual Download Page 44

44

Connect the monitor for viewing the playback
image to the [VIDEO OUT] terminal.

• Still image cannot be enlarged when play-

back screen is in quad.

• Pressing the [CANCEL] button during set-

ting exits the Still Image Zoom mode.

1.

Playback the image

• Perform Steps 

1

 ~ 

3

 of ‘Playing Back Recorded Images’ on page 38.

2.

Press the [STILL] button

• Press the button at the point for which

display is to be enlarged.

3.

Press and hold the [STILL] button for a while

• A  Guide Box for specifying the zoom area will be displayed on the

screen.

4.

Move using the [

/

/

/

] buttons

• Move the Guide Box to the position on the image that is to be enlarged.
• The position can be moved diagonally by pressing buttons simulta-

neously.

Enlarging the Still Image (Still Image Zoom)

Still images can be viewed in an enlarged mode.

Notes

Routine Uses (continued)

Viewing Recorded Images

EC

STOP

PLAY

STILL

DISPLAY

CANCEL

SEARCH

MENU

REV

EXECUTE

TIMER

2.3.

4.

STILL

STILL

Summary of Contents for VR-716E























































































































Reviews:

No comments