manualshive.com logo in svg

JVC VR-716E, Instructions Manual, Page: 101 / 118

Share
Download
JVC VR-716E Instructions Manual Download Page 101

101

1.

Click 

 z 

Caution

Saving VR-716 Settings to a File

Press [EXEC] to create
a backup data for
downloading.

Operational status will
be checked automati-
cally at VR-716 in
intervals of a few
seconds.

Click [SAVE].

• As this is a utility feature, ensure to stop

all operation at VR-716 when executing.

• Execution of utility features can only be

performed by users with Administrator
rights.

• During downloading, recording, playback

and onscreen operation at VR-716 will be
disabled.

• Download will take a few minutes to com-

plete.

• The information related to camera title,

TIME ZONE, network, mail notification, file
sharing and access user will not be stored
into the backup data.

2.

Wait for a while for the backup data to be created

3.

After backup data is created, click [SAVE] to save
the data file to the PC

Note

• The information on the version no. of VR-

716 main unit when the data is created as
well as date/time created (DD/MM/YY
hh:mm:ss) will be displayed on the [Backup
data completed] screen.

• If backup data previously created is saved

at VR-716, the download screen will be
displayed together.

• If backup data that is previously created

exists, this will be overwritten by the new
data.

• The following messages will be displayed

onscreen during download:

NOW PROCESSING

SUCCEEDED

FAILED

Display for 5 seconds (blinking at approx.
1 sec interval) after download has been
completed.

[NOW READING THE DATA]

[DOWNLOAD HAS BEEN COMPLETED]

[DOWNLOAD HAS FAILED]

Notes

1

2

3

Summary of Contents for VR-716E























































































































Reviews:

No comments