manualshive.com logo in svg

JVC VR-716E, Instructions Manual, Page: 38 / 118

Share
Download
JVC VR-716E Instructions Manual Download Page 38

38

Connect the monitor for viewing the playback
image to the [VIDEO OUT] terminal.

Viewing Recorded Images

Playing Back Recorded Images

Play back the recorded images. To do so, search according to the date of the image to be played back using “DATE/TIME SEARCH”
(

☞

 page 40) or according to the time when alarm/sensor signals are received using the “ALARM/SENSOR SEARCH” feature (

☞

page 41).

1.

Search for the image to view

• Search according to the date of the image. (

☞

 page 40)

• Search according to alarm data. (

☞

 page 41)

2.

Press the [PLAY] button

• The playback mark [

<

] on the front display lights up and playback starts.

3.

Press the ‘Camera Selec-
tion’ button

• Select the camera no. for which its

image is to be displayed on the moni-
tor.

• Playback is possible regardless of the order

in Steps 

1

 and 

2

.

• When in the Simultaneous Playback mode that

enables playback and recording at the same
time, press the [STOP] button once to stop
playback, and press the [STOP] button again
to stop recording.

• If no matching image is found in the selected

camera no. during the specified date/time in
Step 

2

, the “SPECIFIED IMAGE IS NOT RE-

CORDED” and “JUMP WITH SKIP BUTTON”
messages will be displayed on the screen.

• When in the Simultaneous Playback mode and

playback is executed immediately after record-
ing starts, the “NO PLAYBACK POSSIBLE
IMAGES” message will appear on the screen.
In this case, press the [PLAY] button again
after recording has continued for about 1
minute.

Routine Uses (continued)

Playing Back During Recording (Simultaneous
Playback Mode)

To stop playback temporarily

To stop playback

• Stops playback temporarily.

To restart playback, press the
[PLAY] button.

• Stops playback.

Upon stopping, the display
switches to the live camera im-
age. Image may be distorted for
an instant upon switching.

‘Camera Selection’

Notes

Front Display

䡵

The following modes of playback are possible
when in the Simultaneous Playback mode:

• Normal playback

       • Direct Jump Playback

☞

  Page 40 ‘Searching Image Accord-

ing to Date/Time’

• Jog/Shuttle Playback

☞

 Page 42 ‘Adjusting Playback Speed’

• Skip Playback

☞

 Page 43 ‘Viewing Recorded Images

in the Skip Mode’

Front Display

SEQUENCE

MULTI

REC

STOP

PLAY

STILL

DISPLAY

CANCEL

SEARCH

8

6

14

16

TIMER

2.

ALARM

SENSOR

SEQUENCE

MULTI

REC

STOP

ALARM

SENSOR

ALARM

SENSOR

ALARM

SENSOR

11

1

9

10

3

4

1

2

7

8

5

6

13

14

15

16

3.

PLAY

3

CAMERA 3

STILL

STOP

Viewing of recorded images is possible when in the Recording mode.
This will not affect the images recorded.

• The playback mark [

<

] and the recording mark [

_

] on the front display

will blink alternately.

• Refer to the notes related to Summer Time.

(

☞

 Page 116)

Caution

Summary of Contents for VR-716E























































































































Reviews:

No comments