JVC VN-X35U - Network Camera, Instructions Manual

Page: 72 / 111

72
Setting Using Internet Explorer
Time Page
This page is for setting time.
This page can be used during access using
A
admin
B
.
●
Click [Advanced Settings] to display setting menu.
●
Click [Time].
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Setting (continued)
A
B
C
D
F
E
Click
A
SNTP For setting the SNTP client feature.
When this is set to
A
On
B
, the system accesses the specified NTP server at
regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by
VN-X35U. Discontinuity in JPEG header’s time may occur immediately
before and after acquiring time from the NTP server.
B
NTP Server For setting the IP address of the NTP server.
C
Access Interval For setting the time interval for access to the NTP server.
D
Time Displays the time on the clock of VN-X35U.
The clock time can be changed by entering an appropriate value. (Second
value cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by
VN-X35U. Discontinuity may occur in the JPEG header’s time immediately
before and after changing the time.
E
Time Zone For setting the time zone.
F
Pc time to
Camera Click [Set] to load the clock time of the computer in use on the camera.