JVC VN-X35U - Network Camera, Instructions Manual

Page: 51 / 111

51
A
Action For specifying the type of action.
Disable : Does not trigger any action.
Mail : Sends out e-mail. Specify the recipient’s mail address. The title
of the mail will appear as [Alarm from VN-X35U] and the sender
as [Camera ID]. Enter the message to send in [Mail Text]. Input
up to 127 alphanumeric characters. To attach the latest image
to the mail, set [Attach Image] to
A
On
B
.
FTP : Sends out pre-/post-recorded JPEG files via FTP. See the page
on Alarm Environment for details on pre-/post-recording and
FTP server settings. (
A
Page 54)
The maximum transmission rate of FTP is 1 Mbps. If a new FTP
trigger occurs during post-recording, the recorded portion is
treated as pre-recording and a new post-recording starts.
During FTP transmission after completing the post-recording, a
new post-recording starts if a new FTP trigger occurs.
TCP : Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via TCP.
UDP : Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via UDP.
TCP/UDP Data : Input up to 127 alphanumeric characters.
Output 1 Make : Changes Alarm Output 1 to Make.
Output 1 Break : Changes Alarm Output 1 to Break.
Output 2 Make : Changes Alarm Output 2 to Make.
Output 2 Break : Changes Alarm Output 2 to Break.
Set the alarm output time in the [Alarm Output Duration]
field.
Position : Moves to the preset position specified in the Action Position No.
item
E
. (
A
Page 53)
Play Audio : Play back an Audio File registered on VN-X35U. (
A
Page 49)
B
1st Trigger For specifying the first trigger to be activated.
[Set values:Input 1 Make, Input 2 Make, Input 1 Break, Input 2 Break,
Motion detection, Position]
Memo:
●
When the second trigger is turned off, the action will be invoked only by
the first trigger.
●
If [Motion detection] or [Position] is selected as the first trigger,
[Max.Interval] and [2nd Trigger] cannot be selected..