JVC RM-LP250M, User Manual

Page: 12 / 21

Controller Use
RM-LP250S
Overall the controller have two Menus. To change
between the two menus press M1 and M2. The
controller have 1 shift level. To activate this press
M7.
C1-C8
Activate User Switch 1-8. If B13 is pressed and
hold on the upper edge, the main display is
hijacked and shows actions for C1-C8
K1-K8
The tiles in the main display are associated with
Knob 1-8
Position UD
Zoom in/out on upper/lower edge of rubber pad
if lens supports it
M1-M6
B7
Activates recording
B8
Activates streaming
ID Display
Displays “CAMERA X”where X is set via the
Camera Selector on the backside. See Backside
section.
ID Tally
Lights up white by default and red when pins on
DB9 connector is set or if Tally have been set on
the camera via other systems/via the B13 button
Black
Controls Master Black
Menu: WB/Sh Menu: Lens
K1
WB Paint: Red Focus
K2
WB Paint: Blue Focus One Push
K3
WB Mode Focus Mode
K4
WB One Push
Press and hold to activate
Detail
K5
Full Auto Iris Mode
K6
Gain Mode Iris
K7
Shutter Mode Iris One Push
K8
Shutter Speed AE Level
Shift: Off Shift: On
M1
Sets “Menu: WB/Sh” Sets “Menu: WB/Sh”
M2
Sets “Menu: Lens” Sets “Menu: Lens”
M3
Full Auto Full Auto
M4
User Switch 1 Character Mix - SDI2
Can be changed to
HDMI or video
M5
User Switch 2 Activates Menu/Status:
Up: Menu Toggle
Down: Status Toggle
Left: Menu Cancel
Right: Menu Set
M6
User Switch 3 Menu Navigation:
Up: Menu Up
Down: Menu Down
Left: Menu Left
Right: Menu Right
12
CONNECTED CAM STUDIO
C1 C2 C3 C4 C5 C6 C7 C8
K1 K2 K3 K4
K5 K6 K7 K8
M1 M2 M3
M4 M5 M6
B7
B8
ID Display
ID Tally Black
M7 M8
B9
B10
B11
B13
Iris
LED
Bar
- Joystick
- Ring
- Button
Position
UD
K1 K2 K3 K4
K5 K6 K7 K8