JVC NX-CDR7R Service Manual Download | Manualshive

Page: 3 / 88

background image

NX-CDR7R

1-3

Preventing static electricity

Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged,
can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.

1.1. Grounding to prevent damage by static electricity

Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as DVD players.
Be careful to use proper grounding in the area where repairs are being performed.

1.1.1. Ground the workbench

1. Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over
it before placing the traverse unit (optical pickup) on it.

1.1.2. Ground yourself

1. Use an anti-static wrist strap to release any static electricity built up in your body.

1.1.3. Handling the optical pickup

1. In order to maintain quality during transport and before installation, both sides of the laser diode on the
replacement optical pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the next page.)

2. Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power
source can easily destroy the laser diode.

1.2. Handling the traverse unit (optical pickup)

1. Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.

2. For specific details, refer to the replacement procedure in the text. Be careful not to take too long a time
when attaching it to the connector.

3. Handle the flexible cable carefully as it may break when subjected to strong force.

4. It is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it

Conductive material
(conductive sheet) or iron plate

(caption)
Anti-static wrist strap

«
1
2
3
4
5
...
»

Summary of Contents for NX-CDR7R

























































































Reviews:

No comments

Related manuals for NX-CDR7R

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 16

Brand: Xilica Audio Design Pages: 28

Brand: Underhill Pages: 15

Brand: Omega Pages: 2

Brand: X-mini Pages: 14

Brand: Falcon Pages: 4

Brand: jablotron Pages: 17

FINISH-OUT MC111M

Brand: M&S Systems Pages: 2

Brand: dB Technologies Pages: 98

Brand: Aeta Audio Systems Pages: 24

Brand: M-system Pages: 7

Smartvest FUSG35000A

Brand: Abus Pages: 4

Brand: Elk Products Pages: 3

Brand: Roadstar Pages: 23

CSMP80 - Multimedia Speaker System

Brand: Coby Pages: 40

Brand: Audiovox Pages: 35

Brand: Kontron Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands