manualshive.com logo in svg

JVC NX-CDR7R, Service Manual

Share
Download
JVC NX-CDR7R Service Manual Download Page 27

NX-CDR7R

1-27

Release the four bosses of the joint a and remove 
the front grill toward the front.

Turn over the body and insert a slotted screwdriver 
into the two holes b of the front panel assembly. 
Then release the four joint bosses c and remove the 
front panel assembly toward the front.

1.

2.

Disconnect the two wires from the tweeter speaker 
terminal on the back of the front panel assembly.

Remove the two screws A  attaching the tweeter 
speaker.

3.

4.

Disassembly method

Removing the tweeter speaker 

(See Fig.1 to 5)

To prevent damage to the product, apply 
a cloth to the box assembly.

CAUTION: 

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

(Bottom)

Joints a

Joints a

Front grill

Hole b

Hole b

Front panel assembly

Box assembly

Joint bosses c

Joint bosses c

Front panel assembly

Box assembly

Tweeter speaker

Tweeter speaker

Speaker terminal

Front panel assembly

Wires

A

Front panel assembly

<Speaker section>

Summary of Contents for NX-CDR7R

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands