Etc.
Advanced
Basics
Getting started
Problem
Actions
Photo Viewer
Album / Title / Artist
/ Year does not
display or display
correctly (Music)
Make sure to use ID3v1 tag.
Duration time does
not display or display
correctly (Music)
Duration time cannot be calculated for MP3
that contains the artwork.
The duration time is calculated from the bit
rate and the file size, the time displayed may
differ from the actual playback time. Higher
the compression rate and lower the bit rate
/ sample rate is these error margins will be
greater.
This is not a malfunction
When the TV is turned on, it will take approx. 18 seconds to properly
produce picture and sound.
When the TV is turned on by turning the main power switch on or by
plugging to the AC outlet, it will take approx. 15 seconds until the TV
is ready to receive any commands.
Problem
Actions
Message
“Missing or weak
signal”
Is the TV connected correctly to the aerial?
Change the direction of the indoor aerial.
Check digital channels signal with “Signal
Check”. (P. 39)
If you still cannot watch the digital channels
after following the steps above, there may
be a problem with your aerial or its cable. Or,
the signal may be too weak.
Consult your retailer.
Æ
“The timer will start
soon”
While watching TV, the message appears
when a timer programme is about to start,
indicating that the channel will be switched.
“Software Update”
You can update the software downloaded by
Over air download (P. 48)
DTV
No picture, no sound
Some digital channels cannot be watched on
this TV. (P. 45)
When the clock is
off time
Change the “Time Zone” setting. (P. 34)
