Setting up your TV
/OK
TV/AV
MENU
P
/OK
Power lamp
ON: Lit
OFF: Unlit
Remote control sensor
The power lamp will blink for a while when you turn the main power switch
on or insert the plug into an AC outlet. This is not a malfunction.
The power lamp will blink every time the TV receives a signal from the
remote or when a TV picks up a clapping sound.
When you turn on the TV, the Power lamp will blink until you get a picture
on the TV and the Power lamp will stay lit. When the Power lamp is
blinking the TV will not be able to receive any commands.
When “Power Lamp” is set to “Off”, the Power lamp will not light up.
For details, refer to “Power Lamp” (P. 35)
Peel off the protection films pasted on the TV stand after the TV has been
placed properly.
Note
Eco sensor (See P. 47)
Microphone (See P. 17)
Touch sensor panel operation
Power On / Off (standby)
Volume
Change channel / page
Display on-screen menu
Switch between TV / AV devices
Touch on the function name to operate the function
You will hear a beep if you have
touched the button correctly.
