JVC LT-26B60BU, Service Manual

Page: 33 / 81

ENGLISH - 17 -
• Press “ ” button to increase volume.
• Press “ “ button to decrease volume.
Selecting Sound Mode
• Using “ “ or “ ” button select Sound
Mode.
• Press “ “ or “ ” button to change Sound
Mode.
You can choose Mono , Stereo or Dual
(I-II) mode, only if the selected channel sup-
ports that Sound Mode.
You can also change sound mode directly
pressing “ I-II ” button on your remote control.
To Store The Settings
In the Sound Menu, all settings are stored
automatically.
Feature Menu
Press “ MENU ” button, now you are in main
menu. In the main menu, select Feature us-
ing “ ” or “ ” button. Then enter the Feature
menu by pressing “ ” / “ ” or “
OK ” button.
Sleep Timer
The Sleep Timer is used to turn the TV off after
a defined period of time after selecting this
item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes.
(Off, 010, 020, 030, 040, ... , 120)
If sleep timer is activated, at the end of the
selected time, the TV goes automatically to
stand-by mode.
Child Lock
You can use this feature to prevent children
turning the TV on/off or changing programmes
or adjustments etc. without remote control.
• Using “ ” or “ ” button select
Child Lock .
• Press “ ” / “ ” button to select Child Lock
On or Off.
When Off is selected, there will be no differ-
ence in the operation of your TV. When On is
selected, the TV can only be controlled by the
remote control handset. In this case the con-
trol panel buttons except “ ” button on the
right side of the TV will not work.
Selecting Menu Language
• Using “ ” or “ ” button select Language .
• Press “ ” or “ ” button to select menu lan-
guage.
EXT-2 Output
From EXT-2 Output; TV , EXT-1 or EXT-4 can be
given. These modes can be chosen by press-
ing “ ” or “ ” button on “
EXT-2 Output ”.
Blue Back (During No Signal)
The Blue Back Feature can be set by “ ” or
“ ” button to either On or Off .
To Store Settings
In Feature menu all settings are stored auto-
matically.
Install Menu
Press “ MENU ” button, now you are in main
menu. In the main menu, select “ Install ” us-
ing “ ” or “ ” button. Then enter the Install
menu by pressing “ ” / “ ” or “
OK ” button.