JVC LT-26B60BU, Service Manual

Page: 32 / 81

ENGLISH - 16 -
Setting Hue
During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video source
is applied. Otherwise, Hue option is invisible
in Picture menu in TV mode :
• Using “ ” or “ ” button select
Hue .
• Press “ ” button to increase hue level.
• Press “ ” button to decrease hue level.
Reset
Press BLUE button to reset the picture modes
to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
Sound Menu
As you enter the main menu, sound will be the
second item. In the main menu, select Sound
using “ ” or “ ” button, then enter the sound
menu by pressing “ ” / “ ” or “
OK ” button.
6RXQG
2Q
0RQR
9ROXPH
%DVV
7UHEOH
%DODQFH
+\SHU6RXQG
$XGLR2XW
6RXQG0RGH
Setting Volume
As you enter the sound menu, Volume will be
the first selected option.
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
Or you can directly change the volume set-
tings using “
+ ” (to increase) or “ - ” (to
decrease) button.
Setting Bass Level
• Using “ ” or “ ” button select
Bass Level.
• Press “ ” button to increase bass level.
• Press “ ” button to decrease bass level.
Setting Treble Level
• Using “ ” or “ ” button select Treble .
• Press “ ” button to increase treble level.
• Press “ ” button to decrease treble level.
Setting Balance
It allows adjusting the distribution between the
left and right speakers.
• Using “ ” or “ ” button select
Balance .
• Press “ ” button to change balance right-
ward.
• Press “ ” button to change balance leftward.
Hyper Sound
• Using “ ” or “ ” button select Hyper Sound .
• Pressing “ ” or “ ” button will turn this fea-
ture on or off.
Pseudo/spatial effect can be turned on or off
via the Hyper Sound item in the Sound menu
or by remote control. In Mono transmission
the left and right channels will be added at left
channel and dummy stereo effect will be in-
troduced to end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels. Hyper
Sound selection will be displayed on the
screen when the TV Status button is pressed
or programme is changed.
To Change Audio Out Settings
Audio Out is a sub-menu of Sound menu.
Use this settings to adjust volume for audio
out terminal which is located at the right side
of the TV.
• Using “ “ or “ ” button select Audio Out.
• Press “ “ or “ ” button or directly press
“ OK ” button on Audio Out , to enter the Audio
Out menu.
$XGLR2XW
9ROXPH
Audio Out Volume
• As you enter the Audio Out sound menu, Vol-
ume will be the only option.