JVC KW-V820BT, Instruction Manual

Page: 63 / 86

ENGLISH 63
REMOTE CONTROLLER
Preparation
R Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
R Changing the battery of the remote
controller
CR2025 (+side)
t Use a commercially available button battery
(CR2025).
t
Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
V
Caution:
t
Keep the battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
t Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
t Do not set the remote control in hot places such
as on the dashboard.
t Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
Before using the remote controller:
t
Aim the remote controller directly at the remote
sensor on the unit.
t
DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material —
special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate